Velatura is a special dyeing technique based on the overlapping different shades of colour in order to create blurred effects; With this technique, it is possible to give the walls such pleasing appearances. To achieve this, you just have to prepare the right equipment and to-do-steps. Continue reading this guide which contains useful instructions to help you, make your DIY velvet on the walls of your house.

Velvet walls

Source : atikah.info

The technique of lacing was born from the aesthetic necessity of antiquing the interior and exterior walls of the buildings. It can be used on different surfaces including the most modern ones, such as plasterboard. In the following guide, we will give you tips on how to paint and perform a snap on a wall.

However, before even you can put your hands to work, you should first clear the walls from asbestos threads. Always keep in mind that it is important to perform a thorough inspection of the house. That is why you should look for asbestos testing services in Melbourne (https://www.asbestoswatchmelbourne.com.au/asbestos-testing-melbourne/). Then followed by the removal process.

The velvet technique already contains an effective description in its name. This painting mode consists, in fact, of laying a base colour layer to which, once dried, an additional “veil” which is superimposed. This second layer is so slim and transparent that it lets you glimpse below the original colour.

It is, in essence, a painting technique based on the transparencies that were directly borrowed from the watercolor painting. The veil is a technique known to man for several millennia, and testimonies about this practice even have been found in ancient Egyptian tombs.

Thanks to the velvet, it is possible to overlay different tones of colours to obtain special shades. You can lay a lot of layers from different colours to create new shades. For example, with a blue background and a second yellow layer, a green colour effect is obtained. It is precisely using contrasting colours that the technique of the velatura gives the best of itself: in fact, the shades that are created by the overlapping of two different tones are often much brighter than those obtained by spreading a premixed product of that colour.

What you need to create such amazing walls:

  • Acrylic paints tone on tone
  • Primer
  • Roller
  • Brushes
  • Sponge

The Main Tools For Making A Velvet

First of all, we provide some information to better understand how this technique works. This type of painting is considered to be highly decorative, rotating around the various games of colours that are often made tone-on-tone. In order to make this type of painting, there are elements which are usually used to give the walls very heavily irregular paintings looks or simply enhancing the lights and shadows on the walls. The most used tools are spatulas, natural sponges, rags and brushes.

Polishing The Wall To Decorate

Let’s start now by preparing the walls to be decorated. To get the most out of the results, you will need to work on a smooth surface without any imperfections. Then using a thin, grainy sandpaper, glide across the wall, paying particular attention to spots where imperfections are present. When this work is over, remove all the dust, you may have created. This is why you have to make sure that your walls are free of asbestos to avoid any contamination from it. Finally, pass a primer hand to the wall to favour colour absorption.

Wall Painting

Continue the work by giving your first hand to the bottom. For this work you will have to use a paint that will accompany you to what you will give later; A tone is usually used. Let it dry and repeat the operation by spreading a further hand painting.

Choice Of Tools To Complete The Painting

Now you have to choose the tool you want to use to complete the painting. Assuming you have decided to use a sponge, next, you should do the following steps:

  • Insert the sponge in the paint gently.
  • Be careful not to overdo it as the colour may spill from the sponge on the wall and ruining the work that has been done so far.
  • Now tap the sponge on the wall, leave it rest and check whether you like the result or not.
  • Keep tapping until you get the colours and effects you like.
  • In order to achieve homogeneous work, you must always use the same amount of colour in the sponge.

 

Now you know how to create your walls to look even more fancier, start getting the work! You should get the best-required tools. But, it is better for you to get them in discounts. Always look for alternatives to cut your spending budget. At the same time, keep the quality at their best! Have fun experimenting!

Leave a comment

Your email address will not be published. Required fields are marked *